Lubricants for your Routemaster

John Pryer (RM1152) has recommended these lubricants for Routemasters and uses them himself. All are available from Morris Lubricants which is a company that has earned a very high reputation from classic vehicle owners as well as operators of large fleets of modern commercial vehicles. His advice is based on a former representative of Morris Lubricants called Graham King.

The advantage of this advice is that only four lubricants are needed for your bus.

Morris equivalent Imperial Litres

Power Steering Liquimatic No.4 6 pints 3.4

Brake Hydraulics Liquimatic No.4 6 pints 3.4

Engine(AEC AV590)* Ringfree XHD 15W/40 4¾ gallons 21.6

Gearbox Liquimatic DII 2½ gallons 11.4

Steering Box EP80/90 6 pints 3.4

Back Axle EP80/90 7½ pints 4.3

Fluid Flywheel Liquimatic DII 3¼ gallons 14.8

Compressor Ringfree XHD 15W/40 1½ pints 0.85

The quantities I have given are from the Routemaster handbook

*My information that this oil is suitable for AEC and Leyland engines (if fitted with an oil filter) as well as the more modern replacement engines, but in the latter case, check with your engine manufacturer

Please email me if any of this information is wrong, or if you have any additional information.

Return to home page